|
|
The Model B SafeSite is an in-line (See-Thru) type that is
used in exising or new piping to observe material flow
through a line. This unit employs standard ANSI B16.5 (2"
to 8") flange ends to specified face-to-face dimensions and
can be supplied with indicators such as drip tubes, rotors
or flappers. The Model B SafeSite can be manufactured to
meet your pressure and temperature requirements, and
different materials of construction are available to meet
your process needs. Other connections are available upon
request, including stub-end with lap joint flanges, buttweld,
threaded, or sanitary. These units can be adapted
to meet smaller or larger-size flange connections if necessary. |
View Engineering Information
Materials of Construction:
- Body: 316 or 304 Stainless Steel
SA- 351; Carbon Steel SA-519; Hastelloy; Alloy 20;
Titanium; Aluminum; etc.
- Retainer Caps: 316 or 304 Stainless
Steel SA-351; Carbon Steel SA 519
- Compression Rings: 304 Stainless
Steel SA-351; Carbon Steel SA-519
- Lens: Two-Piece Laminated Tempered
Soda Lime (Standard); Tempered or Annealed Borosilicate;
Quartz; Lexan; Acrylic; Mica Shields
- Lens Cushion Gaskets: Teflon® (Standard);
Grafoil®; Gylon®; Blue-Gard®; etc.
- Lens Packing: Combination Teflon® Impregnated
and Viton® (Standard); Graphite; FDA Teflon®;
etc.
- Retainer Cap Bolts: 18-8 Stainless
Steel; Carbon Steel SA-193
- Compression Screws: 18-8 Stainless
Steel; Carbon Steel SA-193
- Flanges: 316 or 304 Stainless
Steel SA-182; Carbon Steel SA-105; Hastelloy; Alloy
20; Titanium; Aluminum; etc.
|
|
|
|
|
|
4540 W. Washington St. | Charleston, WV 25313 | Toll-Free (800) 624-9043
or (304) 744-7871 | Fax (304) 744-6705
|
