|
|
The Model I Safesite is an in-line (See-Thru) type that is
used in existing or new piping to observe material flow
through a line. This unit employs standard ANSI B16.5 (2"
to 8") flange ends to specified face-to-face dimensions.
The units can be supplied with indicators such as drip
tubes, rotors or flappers. Other materials are available
upon request, as are other connections including stubend
with lap joint flanges, butt-weld, threaded, sanitary,
etc. Units can be adapted to meet smaller or larger-size
flange connections. |
View Engineering Information
Materials of Construction:
- Body: 316 or 304 Stainless Steel
SA-240; Carbon Steel PVQ; Hastelloy; Alloy 20; Titanium;
Aluminum; etc.
- Inserts: 316 or 304 Stainless
Steel SA-351; Carbon Steel SA-519; Hastelloy; Alloy
20; Titanium; Aluminum; etc.
- Retainer Caps: 316 or 304 Stainless
Steel SA-240; Carbon Steel PVQ
- Compression Rings: 304 Stainless
Steel SA-351; Carbon Steel SA-519
- Lens: Two-Piece Laminated Tempered
Soda Lime (Standard); Tempered or Annealed Borosilicate;
Quartz; Lexan; Acrylic; Mica Shields
- Lens Cushion Gaskets: Teflon®;
Grafoil®;
Gylon®; Blue-Gard®; etc.
- Lens Packing: Combination Teflon® Impregnated
and Viton® (Standard); Graphite; FDA Teflon®;
etc.
- Retainer Cap Bolts: 18-8 Stainless Steel; Carbon
Steel SA-193
- Compression Screws: 18-8 Stainless Steel; Carbon
Steel SA-193
- Flanges: 316 or 304 Stainless
Steel SA-182; Carbon Steel SA-105; Hastelloy; Alloy
20; Titanium; Aluminum; etc.
- Mating Gaskets: Gylon®;
Teflon®; Grafoil®;
Blue-Gard®; etc.
|
|
|
|
|
|
4540 W. Washington St. | Charleston, WV 25313 | Toll-Free (800) 624-9043
or (304) 744-7871 | Fax (304) 744-6705
|
