|
|
The Model L Safesite is developed to satisfy the need for
pressure requirements from full vacuum to 100 psi while
still providing the safety of PresSure Products’ higher-pressure
units. This unit is an in-line (See- Thru) type that is
used in existing or new piping to observe material flow
through a line. It employs standard 150 psi ANSI B16.5 (2"
to 8") flange ends to specified face-to-face dimensions.
Model L Safesites can be supplied with indicators such as
drip tubes, rotors or flappers, and rated for temperatures
up to 450ºF. The unit can be provided with Silicone,
Viton®, Teflon® or EPDM seals. Different materials of construction
are available to meet your process needs, and
other connections are available upon request including
stub-end with lap joint flanges, butt-weld, threaded or sanitary.
Units can be adapted to meet smaller or larger-size
flange connections if necessary. |
View Engineering Information
Materials of Construction:
- Body: 316 or 304 Stainless Steel
SA-351; Carbon Steel SA- 519; Hastelloy; Alloy 20;
Titanium; Aluminum; etc.
- Retainer Caps: 316 or 304 Stainless
Steel SA-351; Carbon Steel SA 519
- Lens: Two-Piece Laminated Tempered
Soda Lime (Standard); Tempered or Annealed Borosilicate;
Quartz; Lexan; Acrylic
- Lens Cushion Gaskets: Teflon®;
Grafoil®;
Gylon®; Blue-Gard®; etc.
- Seals: Teflon®; Viton®;
Silicone; EPDM; etc.
- Retainer Cap Bolts: 18-8 Stainless
Steel; Carbon Steel SA-193
- Flanges: 316 or 304 Stainless
Steel SA-182; Carbon Steel SA-105; Hastelloy; Alloy
20; Titanium; Aluminum; etc.
|
|
|
|
|
|
4540 W. Washington St. | Charleston, WV 25313 | Toll-Free (800) 624-9043
or (304) 744-7871 | Fax (304) 744-6705
|
