|
|
The Model A Flange unit mounts on standard ANSI B16.5
(2" to 8") flange accommodations, and can be manufactured
to meet a wide range of pressure and temperature requirements.
The lens and packing are contained by a retainer
ring on the process side of the flange. Different materials of
construction are available to meet your process needs.
Applications requiring DIN standards or non-ANSI flanges
are available upon request. |
View Engineering Information
Materials of Construction:
- Flange: 316 or 304 Stainless
Steel SA-182; Carbon Steel SA-105
- Compression Ring: 304 Stainless
Steel SA-351; Carbon Steel SA-519
- Snap Ring: 304 Stainless Steel
SA-351; Carbon Steel SA-519
- Retainer Ring: 316 or 304 Stainless
Steel SA-351; Carbon Steel SA-519
- Lens: Two-Piece Laminated Tempered
Soda Lime (Standard); Tempered or Annealed Borosilicate;
Quartz; Lexan; Acrylic; Mica Shields
- Lens Cushion Gaskets: Teflon®;
Grafoil®;
Gylon®; Blue-Gard®; etc.
- Lens Packing: Combination Teflon® Impregnated
and Viton®
(Standard); Graphite; FDA Teflon®; etc.
- Compression Screws: 18-8 Stainless
Steel; Carbon Steel SA-193
|
|
|
|
|
|
4540 W. Washington St. | Charleston, WV 25313 | Toll-Free (800) 624-9043
or (304) 744-7871 | Fax (304) 744-6705
|
