|
|
The Model I Flange unit mounts on standard ANSI B16.5
(2" to 24") flange accommodations and is designed for
applications where corrosion resistance is needed only
on wetted parts. The insert (wetted part) of the Model I
may be made of stainless steel, glass-lined, or Hastelloy,
etc. while the flange housing (non-wetted) can be made
of carbon steel. Units can be manufactured to meet your
pressure and temperature requirements, and different
materials of construction are available to meet your
process needs. Applications requiring DIN standards or
non-ANSI flanges are available upon request. |
View Engineering Information
Materials of Construction:
- Flange: Carbon Steel SA-105
(Standard); 316 or 304 Stainless Steel SA-182
- Insert: 316 or 304 Stainless
Steel SA-351; Carbon Steel SA-519; Glassed Lined; Hastelloy;
Inconel; Titanium; Monel; Alloy 20; etc.
- Compression Ring: 304 Stainless
Steel SA-351; Carbon Steel SA-519
- Lens: Two-Piece Laminated Tempered
Soda Lime (Standard); Tempered or Annealed Borosilicate;
Quartz; Lexan; Acrylic; Mica Shields
- Lens Cushion Gaskets: Teflon®;
Grafoil®;
Gylon®; Blue-Gard®; etc.
- Lens Packing: Combination Teflon® Impregnated
and Viton® (Standard); Graphite; FDA Teflon®;
etc.
- Compression Screws: 18-8 Stainless
Steel; Carbon Steel SA-193
|
|
|
|
|
|
4540 W. Washington St. | Charleston, WV 25313 | Toll-Free (800) 624-9043
or (304) 744-7871 | Fax (304) 744-6705
|
