|
|
The Model I Slip-On units have the same operating and
safety characteristics as the standard Model I Flange. It
can easily be adapted to deeply recessed or unusually
sized sight glass connections. Applications requiring
DIN standards or non-ANSI flanges are available upon
request. |
View Engineering Information
Materials of Construction:
- Flange: 316 or 304 Stainless
Steel SA-240; Carbon Steel PVQ
- Insert: 316 or 304 Stainless
Steel SA-351; Carbon Steel SA-519; Hastelloy; Alloy
20; Titanium; Monel; etc.
- Compression Ring: 304 Stainless
Steel SA-351; Carbon Steel SA-519
- Lens: Two-Piece Laminated Tempered
Soda Lime (Standard); Tempered or Annealed Borosilicate;
Quartz; Lexan; Acrylic; Mica Shields
- Lens Cushion Gaskets: Teflon®;
Grafoil®;
Gylon®; Blue-Gard®; etc.
- Lens Packing: Combination Teflon® Impregnated
and Viton® (Standard); Graphite; FDA Teflon®;
etc.
- Compression Screws: 18-8 Stainless
Steel; Carbon Steel SA-193
|
|
|
|
|
|
4540 W. Washington St. | Charleston, WV 25313 | Toll-Free (800) 624-9043
or (304) 744-7871 | Fax (304) 744-6705
|
